Produse pentru Motoare cu role (10)

Förderbandrollen

Beschreibung Werkstoff: GJL 250. Ausführung: geschliffen. Hinweis: TI = Anzahl der Befestigungsbohrungen E/M im Innenteil. TA = Anzahl der Befestigungsbohrungen E/M im Außenteil. Bestellnummer:21034-040050 A:20 B:40 B1:39,5 C:10 D:13 E:30 E1:15 Tl:4 TA:4 H:6,5 I:13 L:50 M:M3 N:M3 F (N):206 Mx Nm:1 My Nm:4 Mz Nm:3

Sanadek Breathable, natural, non-toxic paint, for internal use, diffusive type, based on long hardening lime putty, prefiltered. Mineral-based, active formulation, high natural anti-mildew and anti-condensation capacity, prepared according to the traditional recipes, for use in ecological building interventions and in the restoration of vintage buildings and monuments. Product based on lime putty and natural pigments. Sanadek has high breathability, it has remarkable mildewcide and antibacterial properties. It has no solvents, thinners, harmful substances in general. Decorative and interior renovation paint. The application supports will be free from fouling, powder, non-adhering parts, etc.; existing paints (washable, organic, solvent based etc.) must be removed. A preliminary fixative treatment of the surfaces is always advisable with a consolidating, transparent, Sanaxil Fix primer, based on potassium silicate. The application of Sanaxil Fix can be done by brush, roller or spray: the number of hands required and the dilution ratio with the most suitable water must be determined according to the conditions and absorption degradation of the supports. The admissible dilution range provides for water addition up to a maximum of 1:1 ratio. Apply by brush, roller, spray, in two coats, spaced-apart, one from the other, by about 24 hours. Apply from 0.30 to 0.40 liters of Sanadek per square metre of surface to be painted. Pail 4 l - Pail 14 l

Mechanik und Elektronik Softwareprogrammierung Hydraulisch und pneumatisch Automatisierung

IKO Needle Roller Cages for Engine Connecting Rods are bearings for use in engine connecting rods. These bearings have superior performance proven in high performance engines of racing motor cycles, and are widely used in small motor vehicles, motor cycles, outboard marines, snow mobiles, highspeed compressors, etc. and also in generalpurpose engines. Bearings for engine connecting rods are used under extremely severe and complex operating conditions such as heavy shock loads, high speeds, high temperatures and stringent lubrication. Needle Roller Cages for Engine Connecting Rods are lightweight, and have high load ratings and high rigidity as well as superior wear resistance to withstand severe conditions.

Fertig- oder Einzelelemente; belastbar und laufruhig aus eigenstabilem Aluminium- oder Stahlprofil Einzelelemente —Rollenelement, versch. Ausführungen —Gleitleisten, Einbau in zwei Höhenlagen —Gleitrampe, sanfter Übergang untersch. Höhenlagen —Kugelelement, verschleiß - und reibungsarme Kugelrolle zum flexiblen Bewegen —Bürstenelement, elastische Bürstenfasern zum Gleiten —Rücklaufelement, verhindert Rückwärtsbewegung —Bremse, sanftes Abbremsen und Anfahrgeschwindigkeit —Distanzstück, als Abstandsstück zur versetzen Anordnung Zubehör für Rollenschienen —Halter, versch. Ausführungen für 4-kant und Rundprofil —Abschlußplatte, Verschluss der Stirnseite —Führungsschiene, Führung und Positionierung weiteres Zubehör —Anschlagpuffer, Dämpfen des Anschlags —Rollenhalter, Montage an Profil —Sensorhalter, variable Befestigung von Wegschaltern —Rücklaufsperre, Verhinderung des Rückfahrens des Werkzeugträgers Teilweise esd-fähig und auch als Einzelteile erhältlich

Spindeln luftgekühlt, flüssiggekühlt, zum Fräsen, Schleifen, Bohren, Entgraten etc. ab Durchmesser 35 bis 250mm, Drehzahlbereich bis 180.000rpm, Aufnahme: HSK, Spannzange, Kundenanforderung Die Abmessungen reichen von Hülsendurchmesser 35mm bis 250mm. Die Schnittstellen sind meist HSK-C, Außenkegel und Spannzangen. Sonderanfertigungen nach Anfrage. Hier ein Auszug aus dem Standardprogramm.

Rollenbahn, konstruiert nach Kundenvorgaben, als Bausatz oder komplett montiert

Protech Sil P Water-repellent, breathable, pigmented paint based on siloxane resins in water dispersion for painting and renovating civil and industrial buildings, and newly manufactured, for both external and internal facades. Recommended as a breathable, water-repellent protective finish for macroporous dehumidifying plasters (Sanatigh, Sanawarme, Caleosana). Protech Sil P creates a microporous filter that effectively prevents the penetration of water and aggressive solutions without compromising the necessary breathability of masonry. Waterproofing and breathable, protective and decorative finishing, for façades in vintage buildings and monuments, subject to protection by the "cultural heritage" or otherwise. Painting of dehumidifying reinforcement cycles with macroporous plasters. Suitable for media like old and new mineral plasters and for pre-existing emulsion paints, provided they are adherent to the media. The application supports should be adequately prepared: free from fouling, powder, crumbling and non-adhering parts, etc., previously treated with the specific fixative Protech Sil Fix. The product can be applied by brush, roller or spray, in two coats. The maximum dilution with water will be 10-15% of the weight of the product. Apply from 0.25 to 0.35 liters of Protech Sil P per square metre of surface to be painted. Pail 4 l - Pail 14 l

Sanafarbe P Breathable, natural, non-toxic paint, for internal and external surfaces, diffusive type, based on lime putty. Mineral-based, active formulation, high natural anti-mildew and anti-condensation capacity, prepared according to the traditional recipes, for use in ecological building interventions and in the restoration of vintage buildings and monuments. Product based on lime putty and natural pigments. Sanafarbe P has a high breathability, remarkable mildewcide and antibacterial properties. It has no solvents, thinners, harmful substances in general. Decorative and internal and external restoration paint. The application supports will be free from fouling, powder, non-adhering parts, etc.; existing paints (washable, organic, solvent based etc.) must be removed. A preliminary fixative treatment of the surfaces is always advisable with a consolidating, transparent, Sanaxil Fix primer, based on potassium silicate. The application of Sanaxil Fix can be done by brush, roller or spray: the number of hands required and the dilution ratio with the most suitable water must be determined according to the conditions and absorption degradation of the supports. The admissible dilution range provides for water addition up to a maximum of 1:1 ratio. Apply by brush, roller, spray, in two coats, spaced-apart, one from the other, by about 24 hours. It allows the easy reproduction of traditional finish type: sponging, rubbing, marbling, infilling. Sanafarbe P is dry to the touch after 2 hours, it can be overcoated after 4 hours, while it will be dry in-depth after 8-16 hours. Apply from 0.20 to 0.40 liters of Sanafarbe P per square metre of surface to be painted. Pail 4 l - Pail 14 l